4X4 Transmission Settings 4X4 with Electronic Shift Transfer Case 1) Place Transmission in Neutral 2) Place Transfer Case in 2H; note with ignition switch turned on, the 4x4 & Low Range indicator lights will be off when vehicle is in 2H! If you have no power or cannot insure that vehicle is in 2H, load onto flatbed or place on dollys. 3) If vehicle is equipped with locking hubs, place hubs in Automatic or Free. Vehicle may be towed at 35 mph for 50 miles from front or rear. 4X4 with Manual (lever operated) Transfer Case (F250 – F550 & Excursion) 1) Place Transmission in Neutral. 2) Place transfer case in Neutral. Transfer case neutral setting is located between 4H & 4L. The lever must be moved slightly to the left and rearward of the 4H position. With ignition switch turned on, the 4x4 & Low Range indicator lights will be off when the transfer case is in Neutral! If you have no power or cannot insure that the transfer case is in N, load onto flatbed or place on dollys. 3) If vehicle is equipped with locking hubs, place hubs in Automatic or Free Vehicle may be towed at 55 mph for an unlimited distance from front or rear.
|Front Tow Limits||MPH||Miles|
|Rear Tow Limits||MPH||Miles|
Please report any errors or omissions to email@example.com. We would like to pass along your suggestions or experiences towing a particular vehicle to all users of TowSpec.com, so please sent them to firstname.lastname@example.org.
Beacon Software makes no warranty regarding the accuracy or quality of the information provided. In no event shall Beacon Software be liable for any indirect, special, incidental, consequential or punitive damages arising from, connected with or relating to use of this site.